A room plan for comparing tables, seating and storage
Clear a route through the room
Mark a proposed piece on the floor with paper or an old sheet folded to size. Open nearby doors, pull a dining chair out and walk from the entrance to the window as you usually do. Carry the laundry basket on that walk if it normally passes through. A table can fit between the walls while still forcing everyone to turn sideways. Where several people use the room together, try the route with someone seated and another person moving behind the chair.
Distinguish the surface from the space beneath
A desk measurement gives the outside width, yet drawers, legs or a support bar may occupy the place where your chair needs to go. Measure your chair across its widest point, including the arms, and record the height of the arms from the floor. Compare those figures with the clear opening under the desk. For a dining table, draw the positions of the legs on the paper outline. Count usable places with the chairs you own, including the seats at the ends.
Say the opening between the legs is 112 cm and each dining chair is 52 cm wide at the seat. Two chairs leave 8 cm total across that opening, before allowing any space between the diners. Mark the chair outlines and try pulling one out with someone in the other. For a work table shared by two people, repeat the test with the chairs at their usual typing distance.
Give moving parts their own footprint
On a storage cabinet, a hinged door needs a clear arc in front. Sliding doors avoid that arc but reveal only part of the cabinet at once. Consider which opening lets you remove your widest folded blanket or box. Drawers need room to extend and space for you to stand in front of them. A shelf dimension may describe the outside frame. For books or baskets, look for the internal depth and the gap between shelves, and check whether any shelf heights can be changed.
Work backwards from the final spot
In an apartment building, the lift door, the lift interior and the turn into the flat are three separate measurements. Compare each with the packaged size where available. If a piece is supplied in parts, identify which assembly steps or fittings the maker specifies and what space you need to lay the parts down. Before choosing between two similar pieces, write down which one allows the difficult movement in your plan. It might be a desk that accepts your chair, or a sideboard whose drawer opens while the dining table is in use. If the packaged dimensions are given for more than one carton, repeat the route check for the longest one and the widest one. Different turns may limit each.